Ferno 35A-NM User Manual Download Page 5

Page: 5 / 32

Model 35A-NM

Safety Information

1.6 Symbol Glossary

The symbols defined below are used on the cot and in this users’ manual. Ferno uses symbols recognized by the International

Standards Organization (ISO), American National Standards Institute (ANSI), the American Society for Testing and materials

(ASTM), and the emergency medical services industry.

1.5 Safety and Instruction Labels

Safety and instruction labels place important information from the users’ manual on the cot. Read and follow label

instructions. Replace worn or damaged labels immediately. New labels are available from EMSAR (page 28) or from your

Ferno distributor (page 2).

Pinch Point Label (Qty. 4)

Keep hands clear of these areas.

General Information Label (Qty. 1)

This label identifies the cot by model name and warns the user to

read this users’ manual, operate the cot with two trained operators,

and to observe the cot load limit.

Magnetic-Resonance Rating Label (Qty. 1)

See Section 1.7 on page 6 for Conditions of Use.

Hand Guard Label (Qty. 2)

Removing the guard can expose operators or helpers to injury. Do

not remove the guard.

Cot Operation Requires

Two Trained Operators

Read the

Users’ Manual

General Warning

of Potential Injury

Pinch Point:

Keep Hands Clear

Load Limit

500 lb

227 kg

Model 35A-NM Cot is

Magnetic-Resonance Conditional

(See Section 1.7, page 6)

Unlocked

Locked

Product meets

European Union

Standards

Do Not

Lubricate

One Trained Operator

(Some Cot Functions)

Summary of Contents for 35A-NM

































Search results

Summary of Contents for 35A-NM

Reviews:

Brands by name

Popular brands

Ferno 35A-NM, User Manual

Search results

Summary of Contents for 35A-NM

Reviews:

Brands by name

Popular brands