Fermax iLOFT-IP CITY, Manual

Page: 21 / 49

ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit
Page 21
We will now outline the steps to follow in order to programme the ADS IP interface.
Depending on the type of connection between the user and the ADS IP interface: Local
network or Internet , it will be necessary to configure different parameters in the IP interface.
Connection via local network
The steps necessary to configure the interface in an installation with connection via the
local network are as follows:
1 . Programme the IP address that makes it possible for the interface to communicate
through the local ethernet network with any authorised computer (connected to that
network).
2 . Programme the ADS address that enables the interface to communicate with the
Fermax ADS intercom or video-intercom installation.
Connection via Internet:
The steps necessary to configure the interface in an installation with connection via the
Internet are as follows:
1 . Programme the "Proxy Connection" and enter the user licences that make it
possible for the interface to communicate through the ethernet network/Internet
with any authorised computer.
2 . Programme the ADS address that enables the interface to communicate with the
Fermax ADS intercom or video-intercom installation.
The IP Interface will not function until it has been
programmed!
Restore Default
Configuración Fábrica
Reset POWER LAN PRG CH
INTERFAZ IP ADS ADS IP INTERFACE
REF. 1304
INPUT 18V 500 mA
Router Internet
Router
Restore Default
Configuración
Fábrica
Reset
POWER LAN PRG CH
INTERFAZ IP ADS
ADS IP INTERFACE
REF. 1304
INPUT
18V 500 mA
SMC user
application
connection via
local network
SMC user
application
connection via
Internet