Fermax DUOX CITYLINE Series, Installer Manual

Page: 17 / 72

Pag 17
Pag 17
DUO DUO DUO DUO DUOX X X X X A A A A Audio Cityline udio Cityline udio Cityline udio Cityline udio Cityline
DUO DUO
DUO DUO
DUOX X
X X
X A A
A A
Audio Cityline udio Cityline
udio Cityline udio Cityline
udio Cityline
DUO DUO
DUO DUO DUOX
X
X X X A
A
A A Audio Cityline
udio Cityline
udio Cityline udio Cityline udio Cityline
DUO DUO DUO DUO DUOX X X X X A A A A Audio Cityline udio Cityline udio Cityline udio Cityline udio Cityline
The DUOX amplifier can be configured to allow for the operation
as a general entrance, block entrance or sub-block entrance.
•
The DUOX system uses 6 digit house terminal addresses.
•
These call code digits are organised as follows: BBSSNN :
- BB: indicates the Block number, (from 00 to 99).
- SS: indicates the sub-Block number, (from 00 to 99).
- NN: indicates the sub-Block house number, (from 00 to 99).
You do not have to segregate the installation according to this
hierarchy since the system adapts to the installation’s needs.
•
The kit panels are a special case and only allow a range of
1 to 2.
IMPORTANT NOTE:
Programming the installer´s parameters.
You can not configure the Cityline buttons panel alone,
since it does not have a keypad for entering the numeric
values. You must temporarily connect a keypad (ref. 7439)
to the last button module to change these parameters
(download the Direct Panels Programming Manual, cod.
97701) at www.fermax.com
).
Configuration - Programming the Amplifier
The DUOX amplifier can be configured to allow for the operation
as a general entrance, block entrance or sub-block entrance.
•
The DUOX system uses 6 digit house terminal addresses.
•
These call code digits are organised as follows: BBSSNN :
- BB: indicates the Block number, (from 00 to 99).
- SS: indicates the sub-Block number, (from 00 to 99).
- NN: indicates the sub-Block house number, (from 00 to 99).
You do not have to segregate the installation according to this
hierarchy since the system adapts to the installation’s needs.
•
The kit panels are a special case and only allow a range of
1 to 2.
IMPORTANT NOTE:
Programming the installer´s parameters.
You can not configure the Cityline buttons panel alone,
since it does not have a keypad for entering the numeric
values. You must temporarily connect a keypad (ref. 7439)
to the last button module to change these parameters
(download the Direct Panels Programming Manual, cod.
97701) at www.fermax.com
).
Configuration - Programming the Amplifier