Fermax DETECTA-6, Installation Manual, Page: 4 / 45

Pag 4
DETECTA-6
DETECTA-6
INTRODUCTION
Detecta-6 is an electronic video entry system incorporating alarm central functions, with
the option of connection to an alarm reception central.
The Detecta-6 system comes with a basic factory configuration that covers most of the
installations to be carried out, although it can be modified to adapt to the specific needs
of any installation.
This manual describes the initial factory configuration.
The main features of the system are:
- 6 wired zones, with pre-assigned functions:
· Zones 1, 2 and 3: Presence detection zones.
· Zone 4: Smoke detection zone.
· Zone 6: Flood detection zone.
- 2 independent areas.
- 8 connection / disconnection codes (1 service code).
- Fast connection function.
- Up to two entry / exit routes, with selection of 2 entry times and 1 exit time.
- 1 main output by MOSFET.
- 1 PGM output by transistor.
- Real time clock.
- 4 relay outputs with schedule programmer.
- Dynamic battery test.
- Memory for up to 125 events. Date and time. Complete visualisation of events.
- Telephone line network fault or cut detection.
- Events sent to Reception Central, with most standard protocols. 2 telephones.
- Two-way remote and local.
- Sending programmable voice messages to private telephone. 8 telephones.
- Telecontrol by means of DTMF commands.
- Listen / Talk in hands-free mode.
- Reproduction of zone and output messages by loudspeaker, special disconnection
mode.
- Recording of messages from telephone/keypad.
- Programmable audio volume.