Fermax 9531, Installer Manual

Page: 23 / 32

23
The screen indicates the
called apartment and the
remaining time.
After 30 sec. the call is
cancelled if it is not answered
Once the call is answered,
the screen indicates the
remaining talking time.
After 120 sec the call ends
(if it is not cancelled from
the apartment)
A speech “The door is open”,
close the door behind you” is
heard at the moment that
the door has been opened
from the called apartment.
INEXISTENT NUMBER indicates that
the called number does not exists or
you have dialled the wrong number.
3 OPERATION
Interaction with MILO panel is through a keypad. In the case of Ref. 9531 it is a mechanical keypad,
and in the case of Ref. 9532 it is a touch keypad.
Operation is the same, independently of the type of keypad
A TFT screen allows basic information for the users, alternating information of how call apartments
and how call concierge.
This screen is usually in off state, to save energy, but it turns on automatically at the moment that
someone stands in front on the panel or touches any button of the keypad and turns off again after
60 seconds since the last operation.
CALLING TO APARTMENTS
Users shall use the keypad to dial the apartment number followed by the “bell” button.
If the panel has been configured as BLOCK PANEL, users have to enter the apartment number (1 to 4
digits) only.
If the panel has been configured as GENERAL ENTRANCE PANEL, users have to enter the block number
(1 or 2 digits) followed by the apartment number (4 digits).
Dial “A” to cancel a call, for example because you are entered the wrong number.
Example:
•
Call to apartment 46 from a BLOCK PANEL: 46 + “bell”
•
Call to apartment 103 of the block number 6 from a GENERAL ENTRANCE: 6-0103 + “bell ”