Pag. 12
Technical Book
MDS-ADS
MDS-ADS
EXAMPLE 5.
Facility of 10 blocks, (each block with its ADS panel) and 80 chalets with 1 Line (ADS) digital kit panel each.
* 6 Blocks with 45 apartments each, (Block 1, 2, 3, 4, 5 and 6).
* 4 Blocks with 30 apartments each, (Block 7, 8, 9 and 10).
Observations:
- We want the apartments in each of los blocks to start from number 1.
- We want the chalet numbers to start from 1.
- We want to program the house terminals (monitors/telephones) from the ADS panel of the Block or
Chalet. See "Programming house terminals from INTERIOR BLOCK".
- Owing to the features of the installation we would be in:
Chalets:
TYPE A --> i i i i / f f f f, (hasta 9999).
Blocks:
TYPE C --> B B i i / B B f f, (Medium-size Blocks, 99 apartments per block and up to 99
blocks).
Programming:
1. Follow the steps in "Enter Programming mode".
2. Follow the steps defined in "ADS Decoder Programming (depending on Type)", (there is one decoder for
each block and one for each chalet).
VERY IMPORTANT NOTE:
The same address must NOT be repeated in 2 different decoders, even though the buildings they are in are
of different TYPES.
TYPE A: Chalets.
Enter
STEPS
1
Programming mode
Enter
STEPS
1
Programming mode
Enter
STEPS
1
Programming mode
Audio-4:
Telephone 1:
0 0 0 1
Audio-4:
Telephone 2:
0 0 0 1
Audio-4:
Telephone 3:
0 0 0 0
Audio-4:
Telephone 4:
F F F F
Chalet 1
(1 House)
Audio-4:
Telephone 1:
0 0 0 2
Audio-4:
Telephone 2:
0 0 0 2
Audio-4:
Telephone 3:
0 0 0 0
Audio-4:
Telephone 4:
F F F F
Chalet 2
(1 House)
Audio-4:
Telephone 1:
0 0 8 0
Audio-4:
Telephone 2:
0 0 8 0
Audio-4:
Telephone 3:
0 0 0 0
Audio-4:
Telephone 4:
F F F F
Chalet 80
(1 House)
...................................
ADS Decoder
2
Programming
Chalets from 3 to 79
(will be programmed the same way)
Initial address: 2
Final address: 2
0000 -> Monitor/
telephone will be
programmed from its ADS
panel.
This output NOT to be
PROGRAMMED. Leave
in FFFF.
