Ferm FHPW-200, Original Instructions Manual

Page: 4 / 48

EN
4 Ferm
HigH pressure cleaner
The numbers in the text refer to the diagrams
on pages 2-3.
For your own safety and that of others,
we recommend that you read this
instruction manual carefully before
using this machine. Keep this instruction
manual and the documentation provided
with the machine for future reference.
introduction
The high pressure cleaner FHPW-200 is quick and
efficient for cleaning vehicles, machines, boats,
buildings, etc., by the removal of stubborn dirt
using clean water and chemical detergents.
When using chemical detergents, only use
biodegradable types. Only clean vehicle engines
in areas in which suitable oil traps are installed.
contents
1. Machine information
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. Machine information
Technical specifications
Voltage 230 V~ /50Hz
Input power 1900 W
Working pressure 110 bar
Max. pressure water supply 4 bar
Motor rotation speed 2800 r/min
Max. water temperature 50º C
Rated flow rate 6 l/min
Max. working flow rate 7.5 l/min
Hose length 5 m
Weight 18 kg
Dimensions 83 x 31 x 41 cm
Lpa (sound pressure level) 83.5 dB(A)
Vibration level 1.0 m/s
2
contents of packing
1 High pressure cleaner
1 Hose
1 Trigger
1 Lance holder (2 pcs.)
1 Hose screws
1 Lance extension
1 Lance adjustable nozzle
1 Detergent spray attachment
1 Safety and operating instructions
1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during transport.
product information
Fig. 1
1. Water outlet
2. Water inlet with filter
3. Main switch
4. Adjustable spray nozzle
5. Lance extension
6. Trigger with lock mechanism
7. High pressure hose
8. Detergent spray attachment
9. Lance holder
10. Hose handle
2. safety instructions
explanation of the symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
DO NOT direct the water jet
towards people or animals.DO NOT
direct the water jet towards the unit
itself, electrical parts or towards
other electrical
safety instructions
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
electrical safety
Always check if your mains voltage •
corresponds with the value on the type plate.
When replacing old cables or plugs: •
Throw away old cables or plugs immediately as •
soon as new ones have replaced these. It is
dangerous to put the plug of a loose cable into
the socket outlet.
When using extension cables: •
Only use an approved extension cable that is •