Ferm CDM1093, Original Instructions Manual

Page: 6 / 56

GB
6 Ferm
The number of revolutions of the
machine can be electronically set.
Do not use in rain.
Indoor use only.
Do not dispose of in household waste.
Important safety notes on charger and
battery block
If you come in contact with acid from the
battery block, rinse it off with water
immediately. If acid gets into your eyes,
rinse out your eyes at once with water
and contact a doctor immediately!
Read and note the operating instructions and
1.
safety notes for the charger and battery block
before use!
NB! Only use the charger and battery block
2.
that were supplied by the manufacturer -
otherwise you will risk an accident.
Protect the charger, battery block and power
3.
tool from moisture, e.g. rain or snow.
Always check that all cables are connected
4.
correctly before using the charger.
If you discover that a cable is damaged, you
5.
should not use the charger again. Have the
damaged cable replaced immediately.
When the charger is not in use, it should be
6.
removed from the power socket. Do not pull
out the charger by grasping the cable.
If the charger has been dropped or has
7.
otherwise been exposed to high mechanical
stresses, you should have it checked for
damage by an authorised dealer before using
it again. Damaged parts should be repaired.
Exercise caution when handling the battery
8.
block and do not drop it or expose it to impacts.
Never attempt to repair the charger or
9.
battery block yourself. Repairs must always
be carried out by an authorised dealer -
otherwise you risk an accident.
Before cleaning or servicing the charger or
10.
battery block, always pull the plug from the
charger socket.
Never charge the battery block when the
11.
ambient temperature is below 5 °C or above
40 °C.
The battery block must not be short-circuited.
12.
A short-circuit will cause a high current
to flow. This may result in overheating,
the danger of fire or explosion of the
battery block. This may damage the
battery block or the user may risk an
accident.
Therefore:
Do not connect any cables to the poles of
•
the battery block.
Take care that there are no metal objects
•
(nails, paper clips, coins, etc.) on the
contact surface of the battery block.
Do not expose the battery block to water or
•
rain.
Only use the battery block supplied
•
in combination with this cordless drill/
screwdriver so as to avoid faults and/or
risks to persons.
13. A damaged battery block or one that can
no longer be charged must be disposed
of as special waste. Do not discard it with
household waste.
14. Never throw the battery block onto a fire or
into water. This will risk explosion!
Electrical safety
Always check that the voltage on the
battery block corresponds to the voltage
on the rating plate. Also check that your
mains voltage corresponds to the input
voltage of the battery charger.
Class II machine – Double insulation –
You don’t need any earthed plug.
Replacing cables or plugs
Immediately throw away old cables or plugs when
they have been replaced by new ones.
Remove the battery block when the power tool •
is not being used and prior to maintenance.
The tool is suitable for use as a screwdriver •
and drill. Any other application is specifically
excluded.