Ferm BCM1017, Original Instructions Manual

Page: 3 / 68

Ferm 3
GB
BATTery ChArger / Jump
STArTer 6V-12V
Carefully read the instructions before
you use the Battery charger!
Know you apparatus
Before you use theBattery charger, carefully
read the instructions, especially the safety
rules. Observe the instructions for maintenance
to ensure your apparatus always operates
properly. Before attempting to operate the
apparatus, familiarise yourself with the controls
and make sure you know how to stop it quickly
in an emergency. Save this user’s manual
and the other documents supplied with this
apparatus for future reference.
Contents
1. Data
2. Safety
3. Installation
4. Operating the Battery charger
5. Maintenance
1. DATA
Technical specifications
Input 230 V ~ 50 Hz
Model Start 12 V, 75 A
Charge 6 V / 12 V
Output 2 A 6 A 12 A
Accumulator capacity 20 Ah 60 Ah 120 Ah
This apparatus has a overload protection by
means of a thermal fuse which will switch on as
soon as the electricity is switched off.
package contents
The following is supplied with your Battery
charger:
1 Set battery clamps
1 Manual
1 Warranty card
2. SAFeTy
explanation of symbols
In this user’s manual the following symbols are
used:
Read instructions carefully
In accordance with essential
applicable safety standards of
European directives
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Indoor use only
Wear safety goggles
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
general safety instructions
1. Keep the work area clean.
• A cluttered work area may cause
accidents.
• Make sure the work area is well-lit.
2. Work environment.
Never leave tools in the rain. Do not use
tools in damp or wet places. Never use
tools near inflammable liquids or gasses.
3. prevent electrical shock.
Keep the power cord away from heat, oil
and sharp edges. Avoid skin contact with
exposed parts of the power cord or plug.
4. Keep children away.
Never allow children or spectators to touch
the tools, keep them at a safe distance from
the work area.
5. Store tools in a safe place.
Tools that are not used must be stored in a
dry and locked placed, out of the reach of
children.