Ferguson REGENT P1 DAB+, Manual

Page: 30 / 73

OPERATING THE UNIT IN FM MODE
FM radio mode receives analogue radio from the FM band and display RDS (Radio Data
System) information about the station.
1. Fully extend the telescopic antenna.
2. Short press the / MODE button to switch to FM mode.
3. Press and hold the “ ”/ “ ” button to search the
station, it will then stop automatically at the first station it finds.
4. Short press “ ” or “ ” button or rotary Tune/Navigate
knob to tune the radio down or up in 50KHz steps for fine tuning.
Note: If the reception is too weak and there is noise on the received station, try to improve
the reception by changing the position of the telescopic antenna.
Station presets
The unit allows you to store up to 20 FM stations which work in the same way as described
in DAB mode.
Now playing information
While FM radio is playing, the screen shows its frequency, or if
RDS information is available, station name and any further
‘Radio Text’ information.
If no information is available, just the frequency and a No Radio Text message is shown.
To view further information about the broadcast
Each time you press MENU/INFO button, the next set of
information is displayed, cycling through: RDS RadioText,
programme type, frequency, time and date.