Ferguson REGENT P1 DAB+, Manual

Page: 25 / 73

POWER SUPPLY

Connect the supplied AC-DC adapter to the DC 12V Jack on the back of the
device, and insert the grid plug into a properly installed AC socket.

Make sure the grid voltage corresponds to the figures on the rating plate.
Caution
Use only the original AC adapter. This adapter has been specially designed for the
accompanied battery in order to gradually charge the battery. Any other adapter may
shorten the battery life or can damage it or the device. Do not use for other devices.
Note:
Disconnect from mains power supply during longer periods of non-use.
Charging the battery installed
The installed battery can also be charged by using the accompanied AC-DC adapter that
you plug into the wall socket and the other end into the DC 12V jack, the battery charging
indicator will light up in Yellow, once it is fully charged, the light turns to Green.
The duration of the charging process depends on the state of charge of the battery.