Ferguson REGENT P1 DAB+, Manual

Page: 29 / 73

To recall a station
1. Short press the MEMORY/PRESET button during DAB mode
to enter the preset memory selecting mode.
2. Rotary Tune/Navigate knob to select the preset station
3. Press Tune/Navigate knob to choose and play the displayed station
Now playing information
While a station is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station such as programme name, track title and contact
details. Long DLS info, over 16 characters scrolls across the display.
To view further information
Each time you short press the MENU/INFO button, the next set of information is displayed,
cycling through: DLS text, DL Plus information (this is only displayed if broadcast by the
station), signal strength, programme type, ensemble name, channel number/frequency,
signal error rate, bit rate, codec/DAB variant, time and date.
Note:
DL Plus presents additional information that can be broadcast by stations and stored
temporarily on your radio.
Dynamic range compression (DRC)
This function reduces the difference between the loudest and quietest audio being
broadcast. Effectively, this makes quiet sounds comparatively louder, and loud sounds
comparatively quieter.
Note:
DRC only works if it is enabled by the broadcaster for a specific station.
To change the DRC setting
Select Menu > DRC, then press Tune/Navigate knob to enter the DRC submenu.
Rotary Tune/Navigate knob to select the available options:
- DRC off: DRC is switched off.
- DRC high: DRC is switched on; the default setting recommended for noisy environment.
- DRC low: DRC is set to half normal level.