The first time you use your Digital Box, you will see a screen
like the one below. The Digital Box now needs to scan for
available Digital TV channels.
• Press [OK] on your Digital Box’s remote control to begin
searching for digital channels.
Typically, the search will take between 2 and 5 minutes,
depending on the digital TV service in your area. In some
areas, however, it may take a little longer (5 to 7 minutes).
As channels are found, their names are listed on the TV screen.
When the scan has finished, the Digital Box will automatically
switch to the first channel in the list.
You can now explore and enjoy the channels available on your
Digital TV service.
If you have a Top Up TV card, please register it before
attempting to use it. Then follow the installation
instructions supplied with the card.
Using Standby:
When you’re not watching TV, you should set your Digital Box
to Standby.
To do this:
• Press [
�
] to switch between ON (green POWER light on and
the channel number displayed) and Standby (green POWER
light off and 24 hour clock displayed).
If you plan to leave your Digital Box unattended for a long
period, put the Box into Standby and wait 20 seconds before
switching it off at the mains. (Don’t worry - all of your
settings will be saved.)
Changing channels:
• Press [
ᐱ
] or [
ᐯ
] on your Digital Box remote control to ‘hop’
through the channels.
To choose a particular channel:
• Press one of the buttons [0] to [9], then press [OK].
• To select 2 or 3 digit channels (10 to 999), press the number
buttons required in succession, then press [OK].
• If you do not press [OK], the Box will change to the selected
channel after approximately 1 second.
As well as using the remote control to operate your Digital
Box, you can also use the buttons on the Digital Box’s front
panel. To use the front panel buttons, press the [MENU]
button and follow the on-screen instructions.
Using your Digital Box for the first time