21
CONNECTIONS
Note:
When connecting a DVD player to the television, the picture resolution is dependent upon the
resolution of both the DVD player and the TV. For best results, select the highest resolution of the
DVD up to the TV maximum of 1080i.
CONNeCtING a HIGH-defINItION (Hd) SOURCe (yUV)
High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the YUV Scart adaptor to this unit, then connect component video cable and
audio cable from the other equipment (
COMPONeNt VIdeO OUt
and
aUdIO OUt
) to this unit
(
SCaRt
and
aUdIO IN
).
To operate the connected device and play the source, first press the
fUNCtION
button to select the
YUV/SCART mode.
* May require a subscription for receiving
HD channels. Check with your cable/
satellite service provider for details.
To AUDIO
IN jacks
To AUDIO
OUT jacks
YUV SCART adaptor
(included)
To
COMPONENT
VIDEO OUT
jacks
To SCART jacks
USING HeadPHONeS
• Turn down the volume before connecting headphones
to the unit, then adjust the volume to your desired
level.
• When headphones are connected, no sound will
come from the front speakers.
earphones /
Headphones
(1/8” [3.5mm]
diameter plug)
Maximum output
voltage
≤
150mV
CaUtION:
Excessive sound pressure from earphones and
headphones can cause hearing loss.
