8.4 Connection of an external memory
1. The receiver supports all types of hard disk drives in housings that are equipped with an
independent power supply. The sole condition is that the hard disk has to have a single
basic partition that is formatted in the NTSF (recommended) or FAT32 system.
2.We recommend that you regularly archive data on your PC computer. A large number of
files with recordings may slow down cooperation with the receiver (slow loading of the file
list).
3.Connect the memory through the USB port located on the front panel under a tab.
8.5 Connection of another receiver
Another receiver may be connected through the LOOP socket. Please keep in mind, however,
that only one device may be used at any one time! Permanent damage may result if both are
turned on simultaneously.
13
