3
OVERVIEW
1. 45RPM Adaptor
This adaptor allows you to play 45RPM records.
2. Tone arm Lever
Raises and lowers the tonearm.
3. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
4. Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic
stop is enabled, the platform will start rotating as soon as
the tone arm is placed over the record and will stop
rotating when it has reached the end of the record. Some
vinyl records stop before the end or do not stop when the
end is reached. In this case set Auto-stop to OFF.
5. Arm Clip
This specially designed arm clip secures the tonearm
while at rest or when not in use. The arm clip has been
designed to remain in the up position while unlocked.
6. Cartridge with needle
When the turntable is not in use, it is recommendable to
place the removable protection cover over the stylus.
7. LED indicator
8. Power & volume control knob
To power on the record player, turn this knob clockwise
until it clicks. When powered on, use this knob to adjust
the output volume. To turn off the record player, turn this
knob counter clockwise until it clicks.
9. DC IN port
Connecting the 12Volt/DC power adaptor.
10. RCA Line output
The audio from a playing vinyl record is sent to this line-
level coaxial audio output. This must not be connected to
phono level devices.
11. Speakers
OPERATION
1.
Connect the record player with the power adapter and plug the other end into a wall power outlet.
2.
Remove the white protective needle cover by gently pulling towards the front of the unit.
3.
Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to
the record.
4.
Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto
the desired position of the record and the turntable player starts to play.
5.
Turn the volume control knob clockwise to adjust the volume.
Noted:
If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control is
turned OFF, record will NOT stop automatically when finished.
BT CONNECTION
BT is the default mode when the auto/stop switch is set to ON position. The LED indicator will flash in blue color.
Turn on the BT-function on your mobile phone or tablet PC on and then search the turntable player (Fenton recordplayer). After
pairing and connection, the LED will light up continuously in blue color and you can play your music on your mobile phone or
tablet PC on this turntable player.
Turn the volume control to adjust the volume. (The volume control of the mobile phone, tablet or PC can also affect the total
volume.)
