EPC1200 SERIES OPERATION MANUAL
35/56
When the LSB of
n
is 0, the on-board button is enabled.
When the LSB of
n
is 1, the on-board button is disabled.
[Notes] Only the lowest bit of
n
is valid.
•
[Default]
n
= 0
ESC d n
[Name]
Print and feed
n
lines
[Format] ASCII
ESC
d
n
Hex
1B
64
n
Decimal 27 100
n
[Range] 0
≤
n
≤
255
[Description]
Prints the data in the print buffer and feeds
n
character lines.
[Notes] This command sets the print starting position to the beginning of the line.
•
This command does not affect the line spacing set by
ESC 2
or
ESC 3
.
•
The maximum paper feed amount is 1016 mm {40”}. If the paper feed amount
(n x
line spacing) of more than 1016 mm {40”} is specified, the printer feeds the paper
only 1016 mm {40”}.
•
Every line feed corresponds to the current selected font height (24 dots for Font A
and 16 dots for Font B).
[Reference]
ESC 2, ESC 3.
GS ! n
[Name]
Select character size
[Format]
ASCII
GS !
n
Hex
1D 21
n
Decimal 29 33
n
[Range] 0
≤
n
≤
255 (1
≤
vertical number of times
≤
8, 1
≤
horizontal number of times
≤
8)
[Description]
Selects the character height using bits 0 to 3 and selects the character width using bits
4 to 7, as follows:
Bit
OFF / ON
Hex
Function
0
Character height selection. See Table 2.
1
2
3
4
Character width selection. See Table 1.
5
6
7
Table 1
Table 2
Character Width Selection
Character Height Selection
Hex Width
Hex Height
00 1
(normal)
00 1
(normal)
10 2
(double-width)
01 2
(double-height)
20 3
02 3
30 4
03 4
40 5
04 5
50 6
05 6
60 7
06 7
70 8
07 8
[Notes]
•
This command is effective for all characters, except for HRI characters.
•
The vertical direction is the paper feed direction, and the horizontal direction is
perpendicular to the paper feed direction.
•
When characters are enlarged with different sizes on one line, all the characters on
the line are aligned at the baseline.
