EPC1200 SERIES OPERATION MANUAL
10/56
1) The printer must be set onto the user’s chassis and screwing it from outside. To do so cut a
window with the dimensions indicated on the figure and thread four holes as shown.
Fig. 3. -
Fixing holes and window to be cut on the mounting wall
2) All the wiring has been designed to allow the user to firstly connect the cables and then screw
the printer onto the panel although the other way is also possible. If it is difficult to access the
rear side of the printer it is advisable to connect all the cables first and perform a self-test
before fixing the printer to the mounting wall.
Fig. 4. -
Application of a self-stand PTR2 with the EPC1200.
