EPC1200 SERIES OPERATION MANUAL
33/58
ESC M n
[Name]
Select character font
[Format]
ASCII
ESC M
n
Hex
1B
4D
n
Decimal 27 77
n
[Range]
n
= 0, 1
[Description]
Selects the character font.
n
Function
0
Character Font A (12 x 24) selected
1
Character Font B (8 x 16) selected
[Notes]
ESC !
can also select character font types. However the setting of the last received
command is effective.
This command must be sent at the beginning of a line. If it is sent in the middle of a
line, all previous data in the print buffer is printed and the ticket is placed at the
beginning of the next line.
[Reference]
ESC !, APPENDIX A - SPECIFICATIONS
ESC a n
[Name] Select
justification
[Format] ASCII
ESC
a
n
Hex 1B
61
n
Decimal
27
97
n
[Range] 0
≤
n
≤
2
, 48
≤
n
≤
50
[Description]
Aligns all the data in one line to the specified position
n
selects the justification as follows:
n(Hex) n
(Dec)
Justification
0, 30
0, 48
Left justification
0, 31
0, 49
Centering
0, 32
0, 50
Right justification
[Notes]
The command is enabled only when processed at the beginning of the line.
This command executes justification in the printing area.
[Reference]
ESC !
[Example]
Left justification Centering Right justification
ESC c 3 n
[Name]
Select paper sensor(s) to output paper-end signals (PE in parallel interface)
[Format] ASCII
ESC
c
3
n
Hex 1B
63
33
n
Decimal
27
99
51
n
[Range] 0
≤
n
≤
255
[Description]
Selects the paper sensor(s) to output paper end signals.
Each bit of
n
is used as follows:
Bit
OFF / ON
Hex
Function
0 - -
Undefined
1
OFF
00
Paper roll near-end sensor disabled
ON
02
Paper roll near-end sensor enabled
2
OFF
00
Paper roll end sensor disabled
ON
04
Paper roll end sensor enabled
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
