EPC1200 SERIES OPERATION MANUAL
32/58
ESC E n
[Name]
Turn emphasized mode on/off
[Format]
ASCII
ESC E
n
Hex 1B
45
n
Decimal 27 69
n
[Range]
0
≤
n
≤
255
[Description]
Turns emphasized mode on or off
When the LSB of
n
is 0, emphasized mode is turned off.
When the LSB of
n
is 1, emphasized mode is turned on.
[Notes]
Only the least significant bit of n is enabled.
This command and
ESC !
turns on and off emphasized mode in the same way. Be
careful when this command is used with
ESC !.
[Default]
n
= 0
[Reference]
ESC !, ESC G
ESC G n
[Name]
Turn on/off double-strike mode
[Format]
ASCII
ESC G
n
Hex 1B
47
n
Decimal
27
71
n
[Range]
0
≤
n
≤
255
[Description]
Turns double-strike mode on or off.
When the LSB of
n
is 0, double-strike mode is turned off.
When the LSB of
n
is 1, double-strike mode is turned on.
[Notes]
Only the lowest bit of n is enabled.
Printer output is the same in double-strike mode and in emphasized mode.
[Default]
n
= 0
[Reference]
ESC E
GS B n
[Name]
Turn white/black reverse printing mode
[Format]
ASCII
GS B
n
Hex
1D
42
n
Decimal 29 66
n
[Range] 0
≤
n
≤
255
[Description] Turns on or off white/black reverse printing mode.
When the LSB of
n i
s 0, white/black reverse mode is turned off.
When the LSB of
n
is 1, white/black reverse mode is turned on.
[Notes]
Only the lowest bit of n is valid.
When white/black reverse printing mode is on, it also applied to character spacing
set by
ESC SP
.
This command does not affect bit image, user-defined bit image, bar code and HRI
characters.
This command does not affect the space between lines.
White/black reverse mode has a higher priority than underline mode. Even if
underline mode is on, it is disabled (but not cancelled) when white/black reverse
mode is selected.
[Default]
n
= 0
ESC J n
[Name]
Print and feed paper
[Format]
ASCII
ESC J
n
Hex
1B 4A
n
Decimal 27
74
n
[Range]
0
≤
n
≤
255
[Description]
Prints the data in the print buffer and feeds the paper [
n
x 0.125 mm (0.0049”)].
[Notes]
After printing is completed, this command sets the print starting position to the
beginning of the line.
The paper feed amount set by this command does not affect the values set by
ESC
2
or
ESC 3
.
The printer uses the vertical motion unit
(
y).
