TM
FENIEX.
2014
INSTRUCTION MANUAL
WEB.
www.feniex.com
8
Storm Pro -
Instruction Manual
Wiring INSTRUCTIONS
> 1ft.
Powering the Storm Pro Siren
Step 1: Secure a user-provided red wire
to the positive output with a screwdriver.
Follow the same process with a black wire
into the negative output.
Step 2: To activate the unit, extend the
red, 12V (+) wire to the 12V (-) post of the
vehicle’s battery. Extend the black, 12V
(-) wire to the ground post of the vehicle’s
battery or chasis.
Important!
Install a 20 amp fuse (user
supplied) to the end of the red, 12V(+) wire.
Do not use a circuit breaker or fusible link.
Do not insert the fuse until the opposite
end of the fuse holder is connected to the
vehicle battery. Install the fuse less than 1’
to the battery.
Important!
Do not wire this unit to an
alternative power supply, such as a AC to
DC converters. Wire only as instructed.
The red, 12V (+) wire should only to the
vehicle’s battery or to a 12V (+) switch post.
Failure to do so may damage the unit and
void warranty.
Outputs:
Positive (+)
Negative (-)
20amp
fuse
+ -
battery
Wiring the Storm Pro Siren
Step 1: Place user-provided wire in the
desired terminal block input.
Step 2: Secure wire with a screwdriver.
1
2
V
1.0
