![background image](http://html1.mh-extra.com/html/fendt/vario-700-series/vario-700-series_installation-manual_4045833025.webp)
Manual No. 016-5030-043 Rev. A
21
Node and Wiring Installation
5.
Secure the node to the mounting bracket assembly using three 3/8”-16 flanged lock nuts (P/N 312-1001-
167).
Vario 900 Series Mounting
FIGURE 4.
Node Installed
Note:
The forward vehicle direction is 1 in the pictured node orientation.
1.
Place the node mounting bracket (P/N 107-0172-084) on the floor of the cab to the left of the operator’s
seat, behind the parking brake.
2.
Secure the bracket to the floor of the cab using four #10-16 x 3/4” self-tapping screws (P/N 310-1002-073)
and four 0.265” ID x 0.505” OD x 0.060” thick washers (P/N 313-2300-120) or six strips of double-sided
tape (P/N 332-0000-019).
3.
Secure the node (P/N 063-4001-013) to the node mounting bracket using three 3/8”-16 zinc flanged lock
nuts (P/N 312-1001-167).
Install the Foot Switch
FIGURE 5.
Foot Switch Installed
Summary of Contents for Vario 700 Series
