1.1.5.7 Shields and safety guards
• Do not open, remove or try to access areas
behind the shields or guards when the engine
is set to ON.
• After you disengage the engine, some parts
continue to move. Wait for the parts to stop
before you open the shields or safety guards.
• Make sure that all shields and safety guards are
in the correct position before you operate the
machine.
• Do not operate the machine if the shields or
safety guards are damaged. Replace damaged
shields and safety guards.
GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
Fig. 8
1.1.5.8 Exhaust warnings
• The exhaust components can become hot
when in operation. Wait for the exhaust system
to become cool before you do work on the
components near the exhaust system.
• Put on personal protective equipment to give
protection to your skin when you do work near
the exhaust system.
• Make sure there is sufficient airflow when you
do work on the machine in a building. Open
doors and windows in the building when the
engine is set to ON.
• If the exhaust system is damaged, stop the
machine immediately. Do this to prevent injury
to personnel or damage to the machine.
• Only approved personnel are to do work on the
exhaust system, speak to your local dealer if
necessary.
GUID-55072A39-D882-4355-8ABA-05660F3F6EDA-high.jpg [High]
Fig. 9
1.1.5.9 Ejected material
• Material ejects from the machine at high
speed. The ejected materials can include:
- Crop
- Rocks
- Soil
- Wood
- Other crop material.
• The ejected material can cause damage to the
machine or injuries to the personnel near the
machine.
• Use the safety guards and shields to protect
personnel from the ejected material.
• Put on personal protective equipment if it is
necessary.
• Make sure that no personnel are near the
machine when it is in operation.
GUID-1D480E10-339B-427D-9D05-37E84CC7A29A-high.jpg [High]
Fig. 10
GUID-E7945D3B-5C05-4080-97F6-133CF1B49364 [V2]
GUID-6D805969-1E82-4D9F-A26D-ADFE67ED1E79 [V1]
GUID-E2468D18-416D-4AA5-BAA6-DD5515E49AA4 [V1]
1. Safety
14
609148D1A
