1.1.5.13 Drive the machine on the road
• Before you drive, make sure that you know the road specifications of the machine for the:
- Speed
- Brakes
- Steering
- Weight.
• Do not engage the neutral position when the machine goes down a slope.
• Obey local laws and the machine specifications with the speed limit.
• Know and obey all local laws that refer to this machine on the road.
• Make sure that you set all the applicable lamps to ON when you drive the machine. Refer to local laws if
it is necessary.
• Make sure that all the lamps and reflectors are in the correct operation. Repair, clean or replace if it is
necessary.
• Select transport mode on the controls.
• Make sure that the machine's dimensions are not more than the road limits for weight, height, length
and width.
• Look for electrical cables over the road. Change the direction of the machine so that it does not touch
electrical cables.
1.1.6 Safe maintenance
1.1.6.1 Operator maintenance
The operator can only do the machine servicing in these situations:
• They know how to do the work.
• They have all the necessary equipment to do the work.
AGCO recommend you only use AGCO parts and fluids to do servicing and maintenance on your machine.
1.1.6.2 General maintenance information
Before you do the maintenance or repairs:
• Park the machine on a solid level surface.
• Apply the parking brake.
• Put all controls in the neutral position.
• Stop the engine.
• Remove the ignition key from the machine.
• Use the wheel chocks to hold the machine.
• Hydraulic components that lift can fall when the
hydraulic pressure decreases. Make sure that
you use the applicable supports to prevent
component movement.
GUID-DB4C2E27-9DAC-4734-83E4-BC4BB5C26EAF-high.jpg [High]
Fig. 13
When you do the maintenance or repairs:
• Examine the machine for damage or more than usual wear.
• Know that some components can possibly move and hit personnel.
• Only use applicable lift and support equipment that has the correct approval and is specified for the
weight.
• Do not stay below the machine or components when lifted above you.
• Know the dimensions and weight of applicable components when you do the work on the machine.
• Make sure that electrical or hydraulic connections are clean before you disconnect or connect them.
GUID-D8FDC0CD-25E3-4B18-924F-D897E910929E [V2]
[V]
GUID-C30C0C73-EDBC-4ABC-A133-ED5D17C6A39C [V1]
GUID-A8283632-AAD9-4BAC-8C30-72F3911EFB40 [V2]
1. Safety
16
609148D1A
