background image

GENERAL INFORMATION

1-10

Operator's Manual Combines  FENDT 5275 C-6335 C- EN - LA327317011 - 09/2011

1.5  SAFETY

Accidents can be prevented with your help.

All accident prevention depends on the full 

co-operation of the persons using or involved with 

service or maintenance of the machine.

Most accidents can be avoided by observing 

simple safety rules.

The best safety system is one in which the operator 

observes all applicable regulations for safety or 

servicing the machine.

Some of the illustrations contained in this manual 

were obtained by photographing combine models 

of the same series, which may be differently 

equipped. This means that apparent discrepancies 

may result between your combine and those 

depicted in this manual.

¥

This symbol is used in this manual 

whenever your safety is involved.

TAKE THE TIME TO READ AND FOLLOW THE 

INSTRUCTIONS. MOST IMPORTANTLY, BE 

CAREFUL!

YOU CAN NEVER BE TOO PRUDENT.

IN ORDER TO PROVIDE A BETTER VIEW, 

CERTAIN PHOTOGRAPHS OR ILLUSTRATIONS 

IN THIS MANUAL MAY SHOW AN ASSEMBLY 

WITH THE SAFETY GUARDS OPEN OR 

REMOVED.

ENSURE THAT ALL GUARDS ARE FITTED AND 

CLOSED PRIOR TO MACHINE OPERATION.

WARNING SYMBOLS AND SAFETY 
INSTRUCTIONS

Personal Safety

Three types of warning signs appear in this manual 
and on the decals applied to the machine 
(“

CAUTION”, “WARNING” and “DANGER

”), 

followed by specific instructions or decals with 
symbols clearly illustrating the type of hazard. 
These instructions involve your safety and the 
safety of people working nearby.

Pay particular attention to these warnings.

¥

CAUTION:

 Indicates a potentially 

dangerous situation which, if not 
avoided, 

may result in minor 

injuries

.

¥

WARNING:

 Indicates a potentially 

dangerous situation which, if not 
avoided, 

may result in serious 

injuries

.

¥

DANGER:

 Indicates a potentially 

dangerous situation which, if not 
avoided, 

may result in very 

serious injuries or even death.

FAILURE TO FOLLOW THE INSTRUCTIONS 
RELATED TO THE TERMS “CAUTION”, 
“WARNING” AND “DANGER” MAY RESULT IN 
SERIOUS INJURIES OR EVEN DEATH.

Machine safety

Other types of warnings ("

NOTE

"

,

 "

IMPORTANT

"

and "

ATTENTION

") are followed by special 

instructions referring to the safeguarding of the 
machine.

NOTE: 

Highlights and describes correct techniques 

or procedures to be adopted by the operator.

IMPORTANT: 

Informs the operator of procedures 

that may prevent damage to the machine.

ATTENTION: 

Informs the operator that unless a 

special procedure is followed, severe damage 
could be caused to the machine.

Summary of Contents for 5275 C
































Reviews: