background image

GENERAL INFORMATION

1-10

Operator's Manual Combines  FENDT 5270-6300- EN - LA327184015 - 11/2007

SAFETY PRECAUTIONS

Most agricultural accidents can be avoided by 
observing simple safety rules.

ROAD TRANSPORT

Combine road transport

1.) The combine may be operated only by 

responsible personnel, trained and authorised 
to work with the machine. Avoid operating the 
combine when physically unfit; it is better to 
interrupt work than to risk an accident. 

2.) In many countries (e.g. Italy and France) a 

driving licence is required if the combine is to 
be driven on public roads.

3.) Operators should familiarise themselves with 

the provisions of the Road Traffic Acts and of 
the regulations thereunder in order to ensure 
that, when taking the combine on public roads, 
they comply with the relevant statutory 
requirements. They should keep a suitable 
speed for road and traffic conditions and 
ensure that all the machine safety devices (if 
required) are fitted and working properly. 

The grain tank must be empty and the 
unloading auger must be turned in.  

4.) For safety reasons, the two brake pedals must 

be latched when travelling on roads. To hold 
the machine on inclined ground, the brakes 
must  be  used  (the  braking  effect  of  the 
hydrostatic drive, only, is not sufficient).  

5.) When travelling on roads, make sure that the 

rotating beacons and the other additional 
signals required to warn that the vehicle is 
abnormally large and slow-moving, are 
working properly. 

6.) When driving on roads, turn the cab access 

ladder forward. 

When entering and leaving the combine always 
use the ladders, handrails and the handles 
provided. It is strictly forbidden to ride on the 
access ladders to the cab, engine 
compartment and grain tank when the machine 
is moving. 

7.) On the left-hand side of the operator seat there 

is an additional seat that can be used by a 
trainee during harvest. 

No other persons are 

allowed on the machine

.

¥

CAUTION:

 This seat is not intended for 

children.

In road transport, one person employed for 
agricultural jobs is allowed in the passenger 
seat, provided this is permitted by local 
regulations and provided that a seat for 
transport of a passenger on public roads is in 
accordance with the combine documentation.

Summary of Contents for 5270 C
































Reviews: