Fender Mustang LT50 User Manual Download Page 23

Page: 23 / 24

USB PORT

The Mustang LT50 control panel features a USB port for audio recording and Fender TONE

use (

see “FENDER TONE” below

). Using a micro USB cable (not included), connect a comput-

er with recording software to this port. No external driver is needed to connect to an Apple

computer. To connect to a Windows-based computer, the user must download the ASIO driver

setup with Fender Mustang device, available at https://support.fender.com/hc/en-us/arti-

cles/214343123-How-do-I-know-which-ASIO-Driver-to-use.

Note that although the USB port and the auxiliary input

can

be used simultaneously, the

USB port

cannot

be used to record a signal from the auxiliary input. Also note that the USB

output is in stereo, and that while preset gain, volume and tone controls will affect USB level and tone, the

MASTER VOLUME control does

not

When recording using the USB port, a level control is located in the LEVELS menu function (

page 21

Mustang LT50 has a rear-panel 1/4” mono line output for connection to external sound

and recording equipment.

When using the rear-panel mono line output, a level control for it is located in the LEV-

ELS menu function (

page 21

Note that preset gain, volume and tone controls will affect mono line output level and

tone; the MASTER VOLUME control does

not

affect mono line output level. Also note

that a TRS (stereo) cable can be used to reduce or eliminate hum.

MONO LINE OUTPUT

FENDER TONE™

Fender Tone—the ultimate desktop companion to Mustang LT amplifiers for Mac and PC—is available as a

free download from fender.com/ToneDesktop. With an easy-to-use interface, Tone users can have conve-

nient control over existing Mustang LT50 functions, plus access to additional presets and many other features,

including:

• Firmware updates

• Dozens of additional Fender presets for auditioning and downloading

• Preset creation and editing with convenient “undo” feature

• Preset editing (replacing amp and effect models, and modifying parameters)

• Preset saving, renaming, moving and clearing

• Preset backup and restore

• Effect bypass

Learn more about Fender Tone at fender.com/ToneDesktop, and find support materials at fender.com/

ToneSupport.

Summary of Contents for Mustang LT50

























Search results

Summary of Contents for Mustang LT50

Reviews:

Related manuals for Mustang LT50

Brands by name

Popular brands

Fender Mustang LT50, User Manual

Search results

Summary of Contents for Mustang LT50

Reviews:

Related manuals for Mustang LT50

Brands by name

Popular brands