FOOTSWITCH: TUNER
To use the footswitch for hands-free tuning, step on buttons “C” and “D” simultaneously to activate chromatic
tuner mode. Note that putting the footswitch in tuner mode also activates the tuner display on the Mustang
LT50 control panel (
page16
).
The pitch letter closest to the sounded note will appear in the footswitch display window (symbols to the right
of each pitch letter denote sharp and flat notes; when tuning to, for example, C sharp or E flat). When sounding
a note, the LEDs above footswitch buttons “A” and “B” illuminate red to indicate degrees of flatness; the LEDs
above footswitch buttons “C” and “D” illuminate red to indicate degrees of sharpness. When correct pitch is
attained, the center LED beneath the footswitch display window will illuminate green.
When tuning is complete, step on any button to exit tuner mode. Note that footswitch tuner use mutes speaker
output.
20
To activate the footswitch tuning function, step on buttons “C” and “D” simultaneously (double yellow arrow). In the example above,
a “G” note is displayed as being particularly flat, as indicated by the illumination of the red LED above button “A” (green arrow).
Here, the “G” note is displayed as slightly sharp, as indicated by the illumination of the red LED above button “C” (green arrow).
Here, the “G” note is at correct pitch, as indicated by the illumination of the green center LED (green arrow). When
tuning is complete, step on any button to exit footswitch tuner mode.
BANK 1
BANK 2
EFFECTS
C
DELAY
D
REVERB
MODE
TUNER
B
MOD
A
STOMP
BANK 1
BANK 2
EFFECTS
C
DELAY
D
REVERB
MODE
TUNER
B
MOD
A
STOMP
BANK 1
BANK 2
EFFECTS
C
DELAY
D
REVERB
MODE
TUNER
B
MOD
A
STOMP
Summary of Contents for Mustang LT50
Page 1: ...EXPANDED OWNER S MANUAL ...
