manualshive.com logo in svg

Fender Cyber-Twin, Instruction Manual

Share
Download
Fender Cyber-Twin Instruction Manual Download Page 39

INSTRUCTION MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P reset Edit FX Mode

 35

+ "

 %

% %

Description

Stereo flange effects with sine-wave or triangle-wave delay modulation. 
Just as in the chorus effects, the sine-wave flange tends to have more 
“swirl,” while the triangle-wave version is more transparent.

Adjustable parameters

Flange Output Level. Adjusts the wet/dry signal ratio. Select between 
1.0 for 0% wet (no effect) and 10.0 for a 50% mix.

$

Flange Rate (Hz). Range: from 0.08 Hz to 10 Hz. Adjusts the rate of 
the flange effect. The increment of change gradually increases from 
0.01 Hz for the slowest rate to 0.08 Hz for the fastest rate. Remember 
that the TAP button can always be used to key in the flange rate by 
feel– two TAPs set the time it takes for the flange LFOs to go through 
one cycle. Remember that although this is a stereo flange, both of the 
flange voices move at the same rate.

"

Flange Depth. Adjusts the amount of Doppler shift and how apparent 
the effect sounds. Select between 1.0 for no apparent effect and 10.0 
for maximum effect.

#

Flange Feedback. Adjusts how much signal from the flange taps is 
recycled back to the input. Select between 1.0 for minimum levels that 
result in chorus-like sounds and 10.0 for maximum flanging.

%

SineFlange/Tri Flange Phase. Adjusts the phase relationship 
between the two flange Low Frequency Oscillators. Select 1.0 and the 
two voices of the flange are in phase, which creates the deepest 
flange. Select 10.0 and the LFOs are out-of-phase and the maximum 
stereo effect is achieved.

~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~

! "

# #  

Description

A tremolo with the sound of a vintage Blackface amp.

Adjustable parameters

Tremolo Output Level. Adjusts the wet/dry signal ratio. Select 
between 1.0 for 0% wet (no effect) and 10.0 for 100% wet (all effect).

$

Tremolo Rate (Hz). Range: 0.08 Hz to 10 Hz. Adjusts the rate of the 
tremolo effect. Select between 0.08 for a slow sweeping rate and 10 for 
a fast rate. The increment of change gradually increases from 0.01 Hz 
for the slowest rate to 0.08 Hz for the fastest rate. Remember that the 
TAP button can always be used to key in the tremolo rate by feel– two 
TAPs set the time it takes for the LFO to go through one cycle. 

"

Tremolo Depth. Adjusts how deeply the tremolo drops the volume. 
Select 1.0 for minimum depth and 10.0 for maximum depth.

Summary of Contents for Cyber-Twin





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands