Fender Cyber-Twin, Instruction Manual

Page: 17 / 68

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
J)
MASTER VOLUME - Controls the overall volume output from the
amplifier. MASTER VOLUME level is not preset programmable.
This knob is motorized to enable control from an expression pedal
or MIDI commands but has an upper limit for motorized control by
manually positioning the MASTER VOLUME knob to the desired
maximum level.
K)
QUICK ACCESS - Assign four favorite amp design presets to these
keys for quick access anytime.
The
LED next to each key will
light up while the preset linked to that key is active and also when a
Quick Access key assignment is newly completed.
****
To Assign: Select a favorite preset with the DATA WHEEL, then
press and hold a QUICK ACCESS key until the adjacent
LED lights up.
****
To Recall: Press the QUICK ACCESS key where a favorite pre-
set was assigned or use the corresponding footswitch button.
L)
SAVE - Save a new amp design, or copy an existing preset to a
P
LAYER
’
S
L
OUNGE
preset of your choice. The SAVE LED blinks
with any change to the active preset to remind you that the current
configuration is new. (LED continues blinking until a SAVE is
completed or a different preset is selected).
****
T o SAVE:
1) Press the SAVE key once and a prompt displays the P
LAYER
’
S
L
OUNGE
preset about to be replaced, (example prompt shown).
2) Rotate the DATA WHEEL to select a P
LAYER
’
S
L
OUNGE
preset to
overwrite with the currently active amp design
(last chance to press EXIT, cancelling the save).
3) Press the SAVE key a second time to complete the save.
‘
You can save current modifications made to a permanent preset
(F
ENDER
C
USTOM
S
HOP
, or Y
OUR
A
MP
C
OLLECTION
banks) only
while the preset and your changes are still active (selecting a
different preset will erase unsaved changes). Changes are saved
as a new P
LAYER
’
S
L
OUNGE
preset.
‘
You can use the Cyber-Twin’s MIDI dump functions to copy
P
LAYER
’
S
L
OUNGE
presets to a storage device such as a MIDI
equipped computer. Transferring presets back to the Cyber-Twin is
done in the same fashion.
‘
Memory Protection: Prevent accidental saves or tampering by
engaging Memory Protection. Access the Memory Protection menu
through the UTILITY Mode, (see
page 44).
Ï
Ð
Ï
Ð
Ï
Ð