1. Remove bolts from dash and attach yoke bracket (A)
using same bolts removed.
2. Attach yoke bracket (B) using two (2) 1/4” x 3/4” bolts
and nuts
3. Tighten All bolts.
YOKE BRACKETS
1. Door post brace (A), remove bolt and attach brace as
shown
2. Attach door post brace (B) to bottom of grab handle
using a M6 bolt.
3. Attach door post (C) with holes near edge facing to
rear to braces using two (2) 1/4” x 3/4” bolts and nuts.
4. Tighten all bolts.
DOOR POST
IMPORTANT
CAREFULLY STUDY THE PHOTO DIAGRAMS SHOWING THE
LOCATION OF EACH PART. LEAVE ALL HARDWARE LOOSE
UNTIL INSTRUCTED TO TIGHTEN.
B
B
A
C
A