Secure brackets with bracket screws and caps
provided.
Screw the elbow into the water outlet (wingback). Sealant required on thread to
achieve a water tight seal.
For Mains Pressure,
fi
t
fl
ow restrictor int
o the handpiece first.
Screw the hose onto
the elbow and handpiece and attach the handpiece to the slider on the rail.
1.
3.
4.
2.
HOW TO INSTALL
INSTALLING INTO STUD/NOG...(RECOMMENDED)
Mount the mounting brackets into position
(731 mm Centre to Centre).
It is recommended that silicone sealant be used to
seal the fixing brackets.
Fit soap dish onto the
rail from the bottom
then fit both end
posts.
Mount the rail onto the
mounting brackets in
place.
5.
6.
INSTALLING INTO CONCRETE/BRICK WALL...
Pre-drill holes to 731 Centre - Centre
and fit the wall anchors then follow
the above instruction.
731mm C-C
731mm C-C
Unscrew and separate
the mounting bracket
from the end post.
1
2
End post
Mounting
bracket
