Felton Digital SMARTVIEW FD-SVCSMC, Installation Manual

Page: 8 / 24

8
SMARTVIEW INSTALL GUIDE
2 Attaching the in-wall box
Prepare the wall to take the in-wall box. The installation of the in-wall box will depend on each individual
situation. In-wall box attached from the front: a 70mm diameter hole is required in a fixing nog flush with
face of the timber framing. Conduits should be used in the walls where necessary to protect the cables and
allow maintenance.
Attach the in-wall box using the screws supplied.
In-wall box attached
from the front
NOG
1 Cutting down the in-wall box (OPTIONAL)
NOTE: We recommend the in-wall box is cut down as shown using a hacksaw
VISION WHEEL INTERFACE PRE-LINE INSTALLATION