2.
Position four (4) aluminum spacers on
top of each of the four mounting holes (two
along the chainstay and two above the Plastic
Frame Clips), which will support the Bamboo
Footplate (See Photo 2).
3.
Place the footplate on top of the spacers
being sure to line up it up above the spacers’
holes. (Note: If you will be adding the Wheel
Guard accessory, do not attach the front screw
on chain stay side until you are installing the
Wheel Guard.) Place two (2) screws through
the holes on the outer edge of the Bamboo
Footplate and through the Plastic Frame
Clips, and two (2) additional screws through
the holes on the inner edge of the Bamboo
Footplate chain stays (See Photo 3).
4.
Thread one (1) nut onto the bottom of each
screw underneath the Plastic Frame Clips and,
while holding the nut with your fingers, tighten
each screw slightly using 3mm Allen wrench
(See Photo 4).
2
3
4
