5A
5B
5.
Reinstall chain guide (See Photo 5A).
Using a torque wrench, tighten all footplate screws to 5Nm (See Photo 5B).
6.
Repeat the above steps for the non-drive
side Bamboo Footplate. Note that the non-drive side does not have a chain guide.
Page 1: ...rame See Photo 1B Make sure that the screw holes are positioned outboard of the frame hoops so that they line up with the holes in the bamboo footplate Also ensure that the thicker side of each Plastic Frame clip is facing upward Parts List 2 x Bamboo Footplates 4 x Plastic Frame Clips 8 x Allen Head Machine Footplate Screws 8 x Aluminum Spacers 4 x Nuts Required Tools 3mm Allen Wrench Torque Wren...
Page 2: ...ard accessory do not attach the front screw on chain stay side until you are installing the Wheel Guard Place two 2 screws through the holes on the outer edge of the Bamboo Footplate and through the Plastic Frame Clips and two 2 additional screws through the holes on the inner edge of the Bamboo Footplate chain stays See Photo 3 4 Thread one 1 nut onto the bottom of each screw underneath the Plast...
Page 3: ... chain guide See Photo 5A Using a torque wrench tighten all footplate screws to 5Nm See Photo 5B 6 Repeat the above steps for the non drive side Bamboo Footplate Note that the non drive side does not have a chain guide ...
