Proteus A3/125 Technical Service Manual
Revised 09 .15 .11
9
Mechanical Assemblies
This section has procedures to:
Remove Roller Assembly
Remove/Replace Hot Rollers (Red)
Remove/Replace Hot Rollers (Blue)
Remove/Replace Hot Rollers (Gray)
Remove Side Panels and Roller Press Side Panel
Covers
Remove Roller Electric Brush
Remove/Replace Metal Gears
Remove/Replace PVC Gears
Replace Roller Bushing
Remove Roller Assembly
1
Remove the 4 acorn nuts from the Metal Bottom Plate
on the reverse side of the laminator .
2
Remove the 4 screws that hold the Roller Assembly to
the Bottom Plate .
3
Carefully lift and rotate the Roller Assembly and place it
on its end opposite the motor .
DO THIS FIRST
Remove Housing Covers
TOOLS
Phillips screwdriver