2
CAPABILITIES
Will shred:
Paper, credit cards, CD/DVDs, staples and small paper clips
Will not shred:
Continuous forms, adhesive labels, transparencies, newspaper, cardboard,
large paper clips, laminates or plastic other than noted above
Paper shred size:
Strip Cut ................................................................................................................. 5.8mm
Maximum:
Sheets per pass ........................................................................................................... 14*
Cards/CDs per pass ....................................................................................................... 1*
Paper entry width .................................................................................................. 229mm
* A4 (70g), paper at 220-240V/50 Hz, 1Amps; heavier paper, humidity or other than rated
voltage may reduce capacity. Recommended daily usage rates: 600 sheets per day; 25
cards; 10 CDs.
14 sheets per pass.
ENGLISH
Model 70S
KEY
A. Indicator lights
1. Overheat (red)
2. Bin Open (red)
3. Remove Paper (red)
B. Paper entry
C. See safety instructions
D. Card/CD entry
E. Window
F. Pull-out bin
G. Disconnect power switch
1. OFF
2. ON
H. Safety lock
I. Auto-On (green)
J. Control switch
I 1. Auto-On
O 2. OFF
R 3. Reverse
K. Sheet capacity indicator
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
• Keep away from children and pets. Keep hands away from paper entry. Always
set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder
openings. If object enters top opening, switch to Reverse (R) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Do not use if damaged or defective. Do not disassemble shredder.
Do not place near or over heat source or water.
• Operation, maintenance, and service requirements are covered in the instruction
manual. Read the entire instruction manual before operating shredders.
• This shredder has a Disconnect Power Switch (G) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Shredder must be plugged into a properly grounded wall outlet or socket of the
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
• Unplug shredder before cleaning or servicing.
12
12
PS-77C
s
14
14
14
14
14
12
70S
70S
70S
12
14
70S
12
14
70S
12
14
70S
70S
70S
70S
12
14
70S
12
12
PS-77C
s
14
14
14
14
14
12
70S
70S
70S
12
14
70S
12
14
70S
12
14
70S
70S
70S
70S
12
14
70S
Feed paper straight into
paper entry and release
or
4
Feed into card/CD
entry and release
When finished
shredding set
to OFF (O)
6
5
12
12
PS-77C
s
14
14
14
14
14
12
70S
70S
70S
12
14
70S
12
14
70S
12
14
70S
70S
70S
70S
12
14
70S
2
Press Auto-On (I)
PAPER OR CD/CARD
BASIC SHREDDING OPERATION
1
Check paper amount
3
Plug in and put
disconnect power
switch in ON (I) position
Continuous operation:
10-12-minute maximum
NOTE:
Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
10-12-minutes will trigger
20-minute cool down period.
G.
E.
B.
A.
C.
D.
F.
J.
K.
H.
I.
9
9
9
9
9
9
