Fellowes Orion 500, Instructions Manual

Page: 5 / 105

6
BEFORE YOU BIND
Select the correct comb diameter
using the document measure. Select the correct punch profile
for the sheet size. Select
releasable dies as appropriate. Select the correct back margin
depth for the number of sheets. To cancel a punch, pull the pin
forward. Test punch a sheet.
2 4 3
Insert the plastic comb into the
opening mechanism. Pull comb-
opening lever forward to open
the comb. Test punch scrap sheets to check
edge guide setting. Load punched sheets directly
onto the open comb.
5 6 7
Empty waste tray regularly -
ideally after each use.
8
Back
Cover
BINDING A DOCUMENT
Punch front and back covers
first. Punch sheets in small batches
that do not overload the
machine or the user. When all punched sheets are
loaded onto the comb, push
the comb lever backwards to
close the comb and remove the
bound document. Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
2 1 4 3
Front
Cover
MAX 30
(80gsm)
1
3