![background image](http://html1.mh-extra.com/html/fellowes/neptune-a3/neptune-a3_instruction_4062141006.webp)
Switch off the machine at the wall. Allow the machine to cool.
The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine.
Cleaning sheets can be used with the machine. When the machine is warm – run the sheets through the machine to clean any residue
off the rollers.
For optimum performance, it is recommended that cleaning sheets are used with the machine regularly.
Problem
Possible cause
Solution
No ‘red’ power on LED
Machine is not switched on
Switch on machine at rear next to plug
inlet and at the wall socket
Ready light does not come on after a
long period
Machine is in a hot or humid area
Move the machine to a cooler and
dry area
Pouch does not completely seal the item
Item may be too thick to laminate
Pass through the machine again
Temperature setting may be incorrect
Check pouch thickness is correctly
selected and pass through again
Pouch has waves or bubbles
Temperature setting may be incorrect
Check pouch thickness is correctly
selected and pass through again
Pouch is lost in the machine
Pouch is jammed
Select reverse button and pull out the
item by hand
Jamming
Pouch was used ‘open end’ first
Pouch was not centred on entry
Pouch was not straight upon entry
Empty pouch was used
Pouch is damaged after lamination
Damaged rollers or adhesive on rollers
Pass cleaning sheets through the
machine to test and clean rollers
STORAGE & CLEANING
TROUBLESHOOTING
W.E.E.E.
This product is classified as Electrical and Electronic Equipment. Should the time come for you to dispose of
this product please ensure that you do so in accordance with the European Waste of Electrical and Electronic
Equipment (WEEE) Directive and in compliance with local laws relating to this directive.
For more information on the WEEE Directive please visit www.fellowesinternational.com/WEEE
7