‘System-Check’ function
When switched on, the machine performs a
‘System-Check’ function. The control panel lights
quickly flash in sequence to check their operation.
‘Safe Start’ function
When switched on, the machine has a default ‘Safe
Start’ function which starts to warm-up at the 80
micron setting. You may select other temperature
settings as required.
‘Reverse’ function
To eject the laminating pouch during use, press and
hold down the reverse button until the pouch has
ejected from the machine.
‘Power Save’ function
If the machine is not active for 60 minutes, the
‘Power Save’ function will place the machine into
standby mode. To operate the machine, press the
‘standby’ button.
Always put the item to be laminated into the ap-
propriate sized pouch.
This machine does not need a carrier to laminate.
It is a carrier-free mechanism.
Always test laminate with a similar size and thick-
ness before final process.
If required, trim excess material from around the
item after lamination and cooling.
For best results, use Fellowes ® brand pouches:
Enhance 80, Impress 100, Capture 125, Protect 175
When working with different pouch thickness’ (tem-
perature settings) it is recommended to start first
with the thinnest pouches.
Prepare pouch and item for lamination. Place item
within pouch centred and touching the leading
sealed edge. Ensure the pouch is not too large for
the item.
•
•
•
•
•
•
•
A
On/off switch
F
Pouch / document entry slot
B
Standby button & LED
G
Entry support shelf
C
Pouch selection buttons
(80,100,125,175 microns)
H
Pouch / document exit
D
Reverse button & LED
I
Cooling system vents
E
Carry handles
LAMINATOR CONTROLS
FEATURES & TIPS
Ensure the machine is on a stable surface.
Check there is enough clear space (min 50cm) behind
the machine to allow items to pass through freely.
Select the correct power lead for the appropriate power
supply. Plug the machine into an easily accessible
mains socket.
Insert the power lead in to the power socket (located at
the rear of the machine).
1.
2.
.
.
SETTING UP THE LAMINATOR
