Page 3
step 1: remove monitor from VESA mount
• Disconnect the monitor cables.
• If a VESA locking screw is installed, remove
it using the 2mm Allen key, as shown below.
• Push forward the tab at the top of the VESA
plate and lift the monitor upward.
• Place the monitor face down on a flat surface.
step 2: remove VESA mount from monitor arm
• Remove the socket cap screw cover from the underside of the monitor arm.
• Remove the socket cap screw using the 4mm Allen key.
• Pull the VESA mount from the monitor arm.
— There are two bushings on which the VESA mount swivels, as shown in the right illustration. Remove
the bushings and save them for re-use. [
Or:
You may re-use the bushings or use the new ones
provided.]
Kata
™
slider mount
retrofit procedure
VESA
mount
VESA
plate
push tab forward
screw cover
lower bushing
upper bushing
socket cap
screw
4mm Allen key
screw cover
lower bushing
upper bushing
socket cap
screw
4mm Allen key
remove
VESA locking screw
M4x15
2mm Allen key
