Page 13
Step #7:
if two rows of monitors —
repeat steps #3 to #6
If two rows of monitors are needed (four or six monitors), the tall KataEX post is required. This larger post is 12" taller than the standard 16" post, which
allows for the additional row of monitors. The relative positions of the connection sleeve(s) for both rows are the same, with the top row sleeve(s) about
12" above the bottom row sleeve(s). To be more precise, for the two rows of monitors to abut, the sleeves should be the height of the monitors apart, plus
approximately ¼" for tolerance.
• First, complete the installation of the bottom row of monitor arm assemblies.
• Then repeat steps #3 to #6.
— Install the first connection sleeve for the top row of monitors at the appropriate distance above the corresponding bottom row sleeve.
— Install the monitor arm assemblies for that sleeve.
— Secure the monitor arm assemblies with the locking ring.
— If there are three monitors in the top row, install the connection sleeve for the stem arm assembly. Then install and secure the stem arm assembly.
KataEX
Assembly
11½"
fixed+motion
motion
4½"
fixed+fixed
fixed
stem arm
Possible connection sleeve positions with one row of monitors
(left)
and two rows of monitors
(right)
. Note that only three of the four
monitor arm types are used in two-row configurations: motion,
fixed+fixed, and fixed+motion.
23½"
fixed+motion
motion
4½"
fixed+fixed
stem arm
fixed+motion
motion
fixed+fixed
stem arm
Example:
KataEX6-FMS