SET-UP
NOTE:
Follow these instructions for
best results.
• Place unit at least 2 feet (½ meter) from the wall.
• Keep unit away from drafty areas.
• Keep curtains away from unit, as they may interfere
with air intake/outlet.
• Place unit on a stable surface with plenty of air
circulation.
Your air purifier was thoroughly inspected and tested
at the factory prior to packaging. Visually inspect it
upon removal from its box. Remove and discard any
packaging material.
1. Take the air purifier out of the box and place the
unit on a firm, level surface.
2. Before turning on the air purifier, remove filters from
plastic packaging. To release the door, press the
oval buttons on each side of the unit. (Figure 1).
3. Gently pull the grill away from the unit and lift away.
(Figure 2).
4. The True HEPA filters will be resting inside the unit.
Remove plastic packaging and ensure the filter is
fully seated in the unit by pressing all four corners
of the filter. (Figure 3).
5. When the filter is in the correct position, the arrow
printed on the side will point toward the back of the
unit. (Figure 4).
6. To replace the grill, set the tabs on the each side of
the bottom of the grill into the notches in the base
of the unit (Figure 5) and rock the grill up until
the top of the grill is secured by the oval buttons
into the oval holes. Push until the grill “clicks” into
place. (Figure 1).
7. Plug the unit into a 120V electrical outlet.
66
