9
8
• To reduce the risk of fire or electric shock, do not remove bottom
cover from base or disassemble base of the grinder in any way.
There are no user-serviceable parts inside. Repair should be done
by authorized service personnel only. Opening base of the grinder
will result in a void of the two-year warranty.
• Do not operate in the presence of explosive and/or flammable fumes.
SAVE THESE INSTRUCTIONS
CLEANING AND USE
BEFORE USE
Remove and recycle or discard all stickers, descriptive labels, cable ties
and packing materials, including static stickers and hang tags with ties.
Before cleaning, we recommend running the grinder for 10 seconds
without coffee beans to help clear beans/grounds from the burrs
and grinds chute.
Always unplug power cord from power outlet before cleaning.
Wipe body of the grinder with a soft, damp cloth. Wipe down
magnetically aligned catch and catch lid and dry thoroughly.
Place grinder on a level surface and plug into a correct voltage.
HOW TO USE
1. Select grind size by twisting the grinds dial to the left or right
(1 = fine, 11 = coarse). See our Grind Guide (
Diagram A) to help
make your selection.
2. Remove the lid from the single dose load bin by lifting off.
3. Pour the desired quantity of roasted whole coffee beans into the
load bin up to a maximum of 100 g /3.5 oz. Replace the lid. Ensure
the catch is fully beneath the chute and is empty. Do not grind
more than 100 g of coffee without emptying the catch. Allowing
the catch to overfill can jam the grinder.
4. Press power button. The grinder will start grinding and stop
automatically once your beans are done grinding. OR press and
hold the power button for more than 1.5 seconds. The grinder
will grind until the button is released.
GENERAL CLEANING
If the grinder is used daily, the burrs should be cleaned at least
every three months using tablets (see "Automatic Cleaning") or
with a stiff brush.
To clean burrs, remove the burrs following the instructions in the
“Removing and Replacing Burrs” section.
Do NOT immerse the grinder in water. Do NOT wash the burrs with water.
Never place fingers into the grind chute while product is plugged in.
Using the provided brush, gently brush coffee dust off of the burrs
and replace burrs following the instructions in the "Removing and
Replacing Burrs” section.
Diagram A:
Grind Guide
