Fellow ODE FLOD-02C, Safety And Maintenance

Page: 16 / 17

1/3
2/3
3/3
31 30
Diagram F
Diagram G Diagram H
8. Carefully lift the rotational burr away from the auger.
To replace the burrs, repeat these steps in reverse order. Make
sure that the rotational burr is reattached to the auger and that
the stationary burr is reattached to the grinds chamber.
CALIBRATING YOUR ODE BREW GRINDER
Ode Brew Grinder is designed for brewing coffee and cannot grind
fine enough for most espresso-machines. However, if you like to
grind finely for AeroPress® Coffee Maker, Prismo, Hario V60, or other
brewing methods, you may want to make sure that where the burrs
touch, or “zero point,” of your grinder is correctly calibrated to better
achieve this range.
Your grinder arrives calibrated from the factory. As the burrs are
seasoned, the burr touch point will drift slightly which is normal and
as such you should expect the settings to shift slightly coarser.
Keeping your grinder calibrated so that Setting 1 is always 1 click
away from the burr touch point helps keep the grinding performance
consistent over the life of your grinder.
Find more information at WeChat public account:
FELLOWPRODUCTS.
WARRANTY
For service, repair, or any questions regarding your Ode Brew Grinder,
please visit WeChat public account FELLOWPRODUCTS. Do NOT
mail the product back to the manufacturer or bring it to a service
center without first talking to a Fellow customer service
representative.
2-Year Warranty
Fellow warrants this product against any defects that are due to faulty
material or workmanship for a two-year period after the original date
of consumer purchase.