FELIXprinters Quick Start Manual for the FELIX Pro 2
3.4 Cleaning the print bed
Remove plastic residue from a previous print job from
the print bed with a (plastic) spatula or carefully use the
supplied tweezers for smaller particles.
Degrease the print bed with a detergent like alcohol,
blue spirit or acetone by putting it on a cloth or paper
towel and gently rubbing the print bed surface.
To improve print quality it is strongly recommended to start every print job with a clean print bed.
Page 19
Chapter 3: Preparation
Summary of Contents for FELIX Pro 2
Page 1: ...Quick Start Guide Pro 2...