FELIXprinters Quick Start Manual for the FELIX Pro 2
Chapter 3: Preparation
Page 15
Calibrating hot-ends
Hot-ends only need to be calibrated after
replacing or after (partial) disassemblage.
For more information please refer to the user
manual or:
www.felixprinters.com/support
3.2 Print bed calibration
Click once onto the button to activate
the print bed calibration.
Calibration is only necessary when:
•
Noticing an uneven first print layer
•
Folding the bed for easy transport
•
Replacing the print bed
•
Replacing the hot-ends
1.
Click once onto the button to
activate the main menu.
2.
Scroll to ‘Control’. Click once to access
the menu.
Scroll down to ‘Level Build PLT’ and click
once to access the menu.
1
2
3
E1:190°C E2:190°C B:55°C
E1:190°C E2:190°C B:55°C
Back
Control
Settings
Dual Preheat/Cool
Remove Build PLT.
Change Filament
Level Build PLT.
Calibrate Extruders
Make sure that the build
Platform is Clear of
any obstructions
>>> Ok <<<
Summary of Contents for FELIX Pro 2
Page 1: ...Quick Start Guide Pro 2...