Quick Start Guide FELIX Pro 3
Page
16
Clean the print surface
The first layer is the most important layer of a print.
It forms the basis for the rest of the print. To ensure the
most optimal first layer adhesion do one of the following:
First remove any filament residue from the surface, with a spatula or carefully
with the tweezers.
Second use one of the two approaches to further prepare the surface:
A.
Use the already applied Kapton layer on the flex plate and clean it with
detergent like methylated spirit, 100% alcohol or acetone. It must be
absolutely grease free. Grease from fingers can ruin adhesion to the bed.
B.
Use an adhesive like Magigoo, Pritt Powerstick, 3DLac or similar.
Note: When using a spray adhesives ensure the flex plate is removed from the
printer. The spray can damage the linear motion components of the machine.
