Page
13
9.3 Load Filament
1.
1.
Open door
Open door
on either the left or right side door of the machine.
on either the left or right side door of the machine.
2.
2.
Place the filament spool
Place the filament spool
on the spool holders found inside.
on the spool holders found inside.
3.
3.
Trim the filament tip at a 45° angle
Trim the filament tip at a 45° angle
using a flush cutter for easier insertion through the bowden tube. Insert the cut end
using a flush cutter for easier insertion through the bowden tube. Insert the cut end
into the dust cleaner and slide it through the bowden tube entirely.
into the dust cleaner and slide it through the bowden tube entirely.
45°