Assembly instruction manual FELIX 2.0 3d printer
www.FELIXprinters.com
Page
30
of
51
Now place the y-axis onto the table. When it doesn’t directly fit, there is
no need to file any parts. The three bolts can be slightly re-oriented.
This can be done to exert a little sideway force on the bolt. When it still
doesn’t fit, you could try to adjust the position of the small aluminum
beam.
After placement mount table bolts with an M4 thin nut. Use a small
washer underneath the m4 nuts at the plastic parts. Use a large washer
for the bolt at the small aluminum beam.
